Rolling Hitch - Magner's Hitch - Magnus Hitch
- One of the most underated knots in Scouting and Guiding, the Rolling hitch
is used to attach one rope to a second, in such a manner that the first rope can be easily slid along the second.
- The knot can be considered a
Clove hitch with an additional turn.
- When tension is applied and the ropes form a straight line, the rolling hitch will lock onto the first rope.
When the tension is released, the hitch can be loosened and slid along the first rope to a new location.
- The tension must be applied on the side of the knot with the extra turn.
- Tip: Use this knot if you have a guy rope with no adjuster. Create a loop on the
end of a second rope which is slipped over the peg. Use a rolling hitch to attach the
second rope to the guyline. Alternatively, take the guyline around the peg and tie the
Rolling hitch back onto the standing part of the guyline, above the peg, thus forming an
adjustable loop. This is known as the Tautline Hitch in America.
- Tip: Use this knot when constructing camp gadgets such as a suspended table.
A Rolling hitch in each suspension rope will allow easy adjustment and a level table!
- Tip: When adjustments are complete, lock the rolling hitch into place by using a stop
knot such as a
Figure of Eight in the first rope, below the Rolling hitch, to stop it slipping.